TXS0102DCTRE4 Datasheet, PDF

Electronic Manufacturer Part no Datasheet Electronics Description Texas Instruments TXS0102DCTRE4 [Old version datasheet] 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS TXS0102DCTRE4 [Old version datasheet] 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS TXS0102DCTRE4 [Old version datasheet] 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS TXS0102DCTRE4 [Old version datasheet] 2-Bit Bidirectional Voltage-Level Translator Texas Instruments TXS0102DCTR [Old version datasheet] 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS TXS0102DCTR [Old version datasheet] 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS TXS0102DCTR [Old version datasheet] 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS TXS0102DCTR [Old version datasheet] 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS TXS0102DCTR [Old version datasheet] 2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS TXS0102DCTR [Old version datasheet] DRV2603 ERM/LRA Haptic Driver Evaluation Kit

TXS0102DCTRE4 Datasheet, PDF More Texas Instruments TXS0102DCTR This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. View datasheet  View product folder  德克萨斯仪器txs0102dctr 这种双位非反相转换器是一种双向电压电平转换器，可用于在混合电压系统之间建立数字交换兼容性。它使用两个单独的可配置电源轨，与一个端口支持的操作电压从1.65 V至3.6 V，它跟踪VCCA能供应，和B端口支持的操作电压从2.3 V至5.5 V，它跟踪VCCB供应。这允许的较低和较高的逻辑信号电平在任何的1.8V，2.5-V，3.3V之间提供双向翻译功能的支持，和5V电压节点。 当输出使能（OE）的输入是低的，所有的I / OS被放置在高阻抗状态，这大大降低了电源静态电流消耗。 为了确保在通电或断电高阻抗状态，原厂应该连接到GND通过一个下拉电阻；电阻的最低值是由当前的驱动程序确定采购能力。