Electronic Manufacturer Part no Datasheet Electronics Description Texas Instruments TPS54329EDDAR [Old version datasheet] 4.5V to 18V Input, 3-A Synchronous Step-Down Converter with Eco-Mode™ Texas Instruments TPS54329DDA [Old version datasheet] 4.5V to 18V Input, 3-A SYNCHRONOUS STEP DOWN CONVERTER TPS54329DDAR [Old version datasheet] 4.5V to 18V Input, 3-A SYNCHRONOUS STEP DOWN CONVERTER TPS54329E [Old version datasheet] 4.5V to 18V Input, 3-A Synchronous Step-Down Converter with Eco-Mode™ TPS54329EDDA [Old version datasheet] 4.5V to 18V Input, 3-A Synchronous Step-Down Converter with Eco-Mode™ TPS54329E_15 [Old version datasheet] 4.5V to 18V Input, 3-A Synchronous Step-Down Converter with Eco-Mode™ TPS54329_15 [Old version datasheet] 4.5V to 18V Input, 3-A SYNCHRONOUS STEP DOWN CONVERTER

Texas Instruments TPS54329EDDAR The TPS54329E is an adaptive on-time D-CAP2 mode synchronous buck converter. The TPS54329E enables system designers to complete the suite of various end-equipment power bus regulators with a cost effective, low component count, low standby current solution. The main control loop for the TPS54329E uses the D-CAP2 mode control that provides a fast transient response with no external compensation components. The adaptive on-time control supports seamless transition between PWM mode at higher load conditions and Eco-mode™ operation at light loads. Eco-mode™ allows the TPS54329E to maintain high efficiency during lighter load conditions. The TPS54329E also has a proprietary circuit that enables the device to adopt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 18-V VIN input. The output voltage can be programmed between 0.76 V and 7 V. The device also features an adjustable soft start time. The TPS54329E is available in the 8-pin DDA package, and designed to operate from –40°C to 85°C. View datasheet  View product folder